8 Best Long-Range Electric Scooters to Conquer Low-Battery Anxiety

One of Varla's long-range electric scooters

Picture this: you’re cruising through the city on your sleek, eco-friendly electric scooter, the wind in your hair, and the world at your fingertips. But then, suddenly, the dreaded range anxiety creeps in. Will you reach your destination, or will you be stranded, miles from home, with a dead battery and a sinking heart?

Fear not, intrepid riders. In this post, we’ll explore the 8 best long-range electric scooters for adults that will banish your range anxiety for good. We’re talking about the ultimate combination of power, distance, and cutting-edge technology to keep you on the road and ahead of the curve. With these little beasts, your sense of adventure is the only limit!

But that’s not all. We’ll also include an in-depth buyer’s guide to help you decide based on your needs and preferences. From battery life to durability, we have all the bases covered.

Are Long-Range Electric Scooters Worth It?

Is a long-range e-scooter worth your money? Let’s explore some of its benefits:

  1. Increased travel distance

For those who need to commute longer or want more flexibility during their adventures, a long-range scooter can provide extra mileage without frequently recharging.

  1. Reduced range anxiety

One of the major concerns for electric vehicle users is running out of battery power while on the go. Long-range electric scooters alleviate this concern by providing a more extensive battery capacity and allowing riders to confidently embark on longer journeys without the fear of being stranded.

  1. Improved battery technology

To achieve long-range capabilities, these machines often utilize advanced battery technologies. That could mean increased capacity, faster charging times, and longer overall battery life. 

  1. Cost savings

No doubt, e-scooters with a long range have a higher upfront cost. But their increased efficiency can result in long-term savings on energy consumption and transportation expenses. The reduced charging frequency minimizes battery degradation and extends the battery’s lifespan, contributing to cost-effectiveness.

  1. Versatility

The best scooters for long-distance travel can cater to various users, from daily commuters to leisure riders. The extended range allows riders to adapt their scooters to different situations and travel requirements.

  1. Environmental benefits

As with electric vehicles, long-range electric scooters contribute to reducing greenhouse gas emissions and air pollution, leading to a more sustainable mode of transportation. The ability to cover longer distances also means fewer trips and potentially less overall energy consumption.

  1. Enhanced features

Long-range electric scooters incorporate additional features, making for a more comfortable and enjoyable ride. These include improved suspension, higher top speeds, and better build quality.

How to Choose a Long-Range Electric Scooter

Here are the primary considerations for longest-range electric scooters.

  1. Your Typical Travel Distance

This is the most apparent consideration for the best electric scooters for long-distance travel. By looking at your daily routes, you can determine if the range of your preferred machine will be enough for those trips. If it’s not, then it’s time for some more research.

If you’re buying an electric scooter to replace a car or public transportation, chances are good that your typical travel distance will be long.

  1. Battery Capacity, Type, and Charging Duration

Battery qualities that matter for long-range electric scooters include: 

  • Capacity: The battery capacity of an electric scooter is measured in watt-hours (Wh). The higher the Wh, the longer your ride will last before recharging.
  • Type: Electric scooter battery can be lead-acid or lithium-ion. Lead acid batteries are cheaper but heavier than lithium-ion batteries, which can be lighter, smaller, and more expensive.
  • Charging duration: How long it takes to charge your electric scooter depends on its battery type and capacity. Most electric scooters with a long range take at least 7 hours for a full recharge. However, some models refill faster, thanks to fast and double charging.
  1. Build quality and comfort

The frame and components should be solid, so your e-scooter will hold up to your weight and the rigors of daily use. If you live in a wet area, choose a higher waterproofing rating.

Choose a long-distance electric scooter with good shock absorption capabilities for smoother rides on rough terrains. At least get one wit pneumatic tires instead of solid rubber ones; they’re more flexible and can adapt better under pressure than their solid counterparts. 

You also want to look at the shock absorbers’ design. Some models come with adjustable ones for added flexibility. Others lack this feature but still work perfectly fine nonetheless. You could also consider a long-range electric scooter with a seat if you’re concerned with leg fatigue. 

  1. Warranty

The warranty is critical when buying any product for protection against defects and malfunctions. If a manufacturer offers a lengthy product warranty, it’s likely because they know their product will last for years without needing repairs or replacements. 

Some parts in electric scooters with long ranges and high speeds will likely need replacing after extensive use. These include tires (which wear out quickly), batteries (which lose capacity over time), and motor controllers (which become damaged due to overheating). Ensure these items are covered under any extended warranty before making your final decision!

Best Long-Range Electric Scooters

1. Inokim OXO

Inokim OXO long-range e-scooter

Price: $1,999

This engineering marvel is not just a scooter; it’s a statement, a testament to the fusion of art and technology. The Inokim OXO stands proud, boasting a solid CNC-machined build that refuses to groan under pressure.

The components, sourced from the trusted INOKIM, fit together seamlessly, creating a masterpiece of form and function. The large foot platform measures a generous 20 x 8.5 inches, providing ample space to plant your feet. However, perfection is elusive. The deck, made of hard plastic, lacks a grippy rubber or tape. But worry not! A simple solution awaits in the form of grip tape, available for as little as $9-$18 on Amazon. 

Armed with IPX4 waterproofing, this road warrior weighs 74 pounds and supports riders up to a formidable 350 pounds.

At the heart of this best long-range electric scooter lies a 57.6V, 25.6Ah LG battery. With a maximum mileage of 52 miles on Eco mode, adventure awaits. The real-world range for aggressive riding is an impressive 36 miles. Its charging time is 13.5 hours, but its thrill is worth the wait.

Speed is limited to 15 mph, but when unleashed its true potential, it can soar up to 40 mph. The Inokim OXO clocks 15 mph in a breathtaking 3.5 seconds, thanks to the dual 1000W brushless gearless motors, each boasting a peak power of 1300W. A front engine on/off button puts you in complete control.

The two 10 x 2.5-inch pneumatic tires offer a smooth-sailing sensation on all terrain types, and their thin profile ensures nimble steering. Rubber suspension and single-sided swingarms complement the experience. The Zoom hydraulic brakes bring you from 15 mph to a halt within 8.8 feet.

 In the dark, low-mounted LED lights at the front and rear illuminate your path, turning on automatically when night falls. However, the rear light’s position leaves something to be desired. To ensure maximum visibility, consider an after-market high-mounted headlight.

2. Dualtron Thunder 2

Dualtron Thunder 2

Price: $4,299

Rising from the ashes of its legendary predecessor, Dualtron Thunder, the Thunder 2 emerges as the torchbearer of Minimotor’s electric scooter legacy. It epitomizes power and finesse, a beefy, high-performance off-road machine designed to conquer the roughest terrain.

Combining aviation-grade aluminum and steel, Thunder 2’s frame and handlebar are built to withstand aggressive use and endure the test of time. It sustains the classic EY3 throttle, but stainless steel switches on the control panel elevate it to a new level of sophistication. The foldable handlebars and stem add a touch of practicality to this wild beast.

Weighing in at 105 pounds, the Thunder 2 is no lightweight contender. Yet it supports riders up to 265 pounds and has a large foot platform. Grip tape is recommended for added traction.

Thunder 2’s 72V, 40Ah battery pack features LG M50T cells. With a max mileage of 107 miles (though real-world figures hover around 59 miles in top performance mode), it’s the cure every off-road enthusiast has been waiting for. Its typical charge time of 26 hours can be cut to a mere 8 hours with fast charging.

This fast electric scooter for long-distance ranges packs two motors that deliver a staggering 5040W max each, reaching speeds up to 62 mph. Accelerating from 0 to 30 mph within 2.2 seconds, it may trail the Kaabo Wolf King GT by a hair, but it’s still an undeniable force to be reckoned with.

The 11″ flat-proof tires and front and rear suspension make the Thunder 2 the ideal off-roading companion. The wheels are easily removable for quick repairs and replacements. NUTT hydraulic brakes and electric braking provide a solid stopping force that brings you from 15 mph to a complete stop in about 10 feet.

Adding panache to its prowess, the Thunder 2 boasts remote-controlled swag lights for visibility and flair. However, it deserves a brighter, high-mounted headlight for increased visibility. Thankfully, the inclusion of a horn rectifies a shortcoming of its predecessor.

3. Techlife X9

Techlife X9 electric scooter

Price: $3,693
In the realm of long-range e-scooters, a new titan has emerged – the Techlife X9. A fierce contender in the market, this beast of a machine offers an unparalleled riding experience that leaves even the Thunder 2 envious. Make no mistake; this is no playground toy for beginners.

One glance at the X9 is enough to see that it is built to last. With a premium all-metal construction, its sleek black frame adorned with striking red highlights exudes luxury and power. Techlife’s signature double-bar stem adds a touch of high-end bike aesthetics, setting it apart from the crowd.

The foldable stem offers convenience, although the handlebars remain fixed, unlike the Thunder 2. But what lies beneath the surface sets the X9 apart from its competitors. With a 2300Wh LG Li-ion battery, this e-scooter boasts an incredible 80-mile range. And while the standard charger takes 22 hours to recharge, the dual charging ports can reduce this time by half if you invest in an additional charger. Fast charging may not be on the menu, but this is a small price to pay for such a stunning performance.

Powering this juggernaut are dual 1600W motors, allowing you to conquer intimidating 35% slopes without a hitch. Eco and turbo modes cater to your energy needs, while single and dual-motor settings let you dictate the intensity of your ride. You can reach breakneck speeds up to 53 mph – a hair shy of the manufacturer-quoted 62 mph, but thrilling nonetheless.

X9’s 11″ pneumatic wheels, coupled with adjustable front and rear suspension, make for a fun and comfortable ride at top speeds. With an additional $71, you can swap in off-road tires for a stable, adrenaline-pumping trip on unforgiving terrains. The hydraulic brakes work impressively well on slippery surfaces. 

Weighing in at a hefty 115 pounds, the X9 can support up to 265 pounds, with its enormous deck accommodating riders of all shapes and sizes.

4. VSETT 11+ Super72

VSETT 11+ e-scooter for long distance

Price: $4,299

The name alone speaks to the magnitude of this marvel. With 11-inch tires and a 72V battery, the VSETT 11+ Super72 flaunts a sporty look and feel that demands respect. As you approach this mechanical beast, you’re greeted by an optional display, larger and easier to read than any rival. The NFC key lock immobilizer ensures your precious ride remains secure and tamper-free.

At its heart lies a 72V, 32Ah LG battery, propelling the scooter to a maximum range of 60 miles. Powered by two 2000W motors, the top speed may be advertised at 72 mph, but real-world tests have proven a still-impressive 55 mph, equal to the Nami Burn E-2. And fear not, speed demons: this fast long-range electric scooter remains wobble-free. 

The VSETT 11+ Super72 is the epitome of stability and control. Rear and front hydraulic shocks, alongside longer swing arms, provide an unparalleled riding experience. The double-stem design further enhances stability, freeing you to conquer any terrain without care. It has 11 x 3.7-inch pneumatic tires, which are effortless to change and offer exceptional grip and performance. 

The stock rear-view mirror adds a touch of practicality to this already versatile machine. While powerful Zoom hydraulic brakes give you the confidence to unleash the full potential of this long-range electric scooter for adults.

Though the VSETT 11+ Super72 tips the scales at a hefty 128 pounds, the official weight capacity of 330 pounds means it’s more than capable of handling riders of all sizes. 

5. Nami Burn E-2 Max

Nami Burn E-2 Max e-scooter with long range

Price: $4,599

Nami Burn E-2 Max leaves no stone unturned in pursuing unrivaled dependability and longevity. Based on a heat-treated aviation-grade aluminum tubular frame, it stands unyielding against the elements, eliminating wobbles and ensuring a robust and unwavering ride. Its carbon fiber steering column, flexible yet high-strength, grants you unparalleled control in the face of adversity.

The sizable, multi-color waterproof display provides critical stats such as speed, range, G force, and controller temperature. And with an IP55-rating, you have little to fear about nature’s wrath.

Unleash the power of two potent 1500W brushless hub motors, boasting a combined peak output of 8400W. The two 50A sinewave controllers ensure smooth acceleration up to 60 mph. Five riding modes and customizable settings for acceleration and motor torque let Nami Burn E-2 Max caters to your every whim. 

The 72V, 40Ah battery, packed with high-density LG 21700 cells, has been tested to last an impressive 72 miles at an average speed of 28 mph while carrying a 176 lb rider. With a 5A fast charger, the Nami Burn E-2 Max recharges in 10 hours. Worried? Don’t be. Adding a 6.5A charger reduces that to 4-5 hours.

Outfitted with 11″ tubeless tires and optional off-road upgrades, the Nami Burn E-2 Max allows you to explore different terrain types. The double adjustable suspension offers customization for higher speeds or off-roading adventures, while 4-piston LOGAN hydraulic brakes, a motorcycle-style horn, and all-around lighting ensure safety.

6. Emove Cruiser

EMOVE Cruiser

Price: $1,399

Are you seeking a long-range electric scooter with a seat? The Emove Cruiser could be your perfect choice. Its deck measures 21 x 10 inches, offering ample room for a comfortable seat, storage case, or both. For a mere $65, the optional seat transforms your ride into a luxurious journey of unparalleled comfort.

Emove Cruiser’s anti-theft locking system ensures your prized possession remains safe. But while the unique, irreplaceable keys attest to the value of this long-range e-scooter, you want to keep copies somewhere safe. 

Regarding aesthetics, Emove Cruiser offers a stunning array of color options for the frame. You can choose between white, black, purple, orange, blue, and red. An IPX6 rating guarantees the beast’s resilience against the elements, while its pneumatic car-grade, tubeless tires ensure a puncture-free ride, even on the most treacherous of roads.

The telescopic steering column classifies Emove Cruiser among the best electric scooters for adults of all sizes, and the waterproof LCD keeps you informed in any weather.

With plug-and-play cabling, replacing the electronics is a breeze, further solidifying the manufacturer’s commitment to user-friendly design. The potent 1000W motor—capable of maxing out at 1600 watts—propels you to 33 mph. Under the hood is an impressive 52V, 30Ah LG battery with 8650 cells, promising a remarkable 62-mile range. Charging time ranges between 9-12 hours.

This best long-range electric scooter’s incredible weight capacity of 352 pounds, while weighing a mere 56 pounds, is a testament to its robust construction. Its 8-inch ground clearance ensures smooth sailing on any terrain.

Safety is paramount, and the Cruiser’s XTECH hybrid hydraulic brakes with 140mm rotors deliver the stopping power you need for a secure ride.

The Emove Cruiser isn’t just a marvel of performance. It’s also a cornucopia of accessories. The possibilities are endless, with options like a VM fingerprint U-lock, side view mirrors, thumb throttle, brake rotors, tire sealants, and a handlebar front bag.

7. Apollo City Pro

Apollo City Pro

Price: $1,699

Building upon the legacy of its predecessor, Apollo City Pro boasts dual motors, eye-catching aesthetics, and a plethora of commuter-friendly features that will make you the envy of every sidewalk warrior. 

Behold the power of dual 500W motors, enabling an ESG-tested top speed of 31 mph, and choose from three riding modes to fit your mood and surroundings. You enjoy effortless acceleration with the grippy rubber thumb throttle. It enables you to switch to Gear 1 for a leisurely 10 mph, Gear 2 for a zippy 21 mph, and Gear 3 to conquer the urban jungle at 32 mph.

The Apollo City Pro’s 10″ self-healing, tubeless tires, claimed to be flat-proof, make for uninterrupted rides. The turn signals, conveniently located within the thumb’s reach, automatically switch off, so you never leave them on accidentally.

This best electric scooter for long-distance travel is app-compatible. That allows you to adjust braking and acceleration intensity right from your smartphone. While the scooter’s display could benefit from added brightness, the optional phone mount—though setting you back $50—is a worthy investment.

The 48V, 18Ah battery powers your adventure up to 38 miles per charge. Integrated BMS shields your machine from short circuits, overcurrent, overcharging, overheating, and undervoltage. The battery recharges in a mere 4.5 hours with the 3A charger. 

Apollo City Pro’s triple spring system ensures a comfortable ride. It also flaunts dual drum brakes that outlast disc brakes tenfold and halts it from 15 mph within 12.4 feet. A thumb lever on the left handlebar lets you switch to regenerative braking that recharges your battery while prolonging the life of your drum brakes.

Boasting an IP66 water resistance rating, the Apollo City Pro is a true all-weather warrior. And although the handlebars stand tall at 41.5 inches above the deck, the scooter’s portability is one of the few areas where the Apollo City Pro doesn’t surpass its predecessor, weighing in at 65 pounds.

8. InMotion S1

InMotion S1: Among most beautiful long-range electric scooters

Price: $699

A sleek, all-black design with the InMotion logo proudly engraved on the deck, InMotion S1 screams style and sophistication. It’s priced at a modest $699, making it an absolute steal for those seeking a cheap long-range electric scooter.

InMotion S1 features aluminum construction, coming in at 65 pounds. The rated payload capacity of 300 pounds is a testament to the perfect balance between strength and weight. Assembling the scooter is a breeze, taking roughly 30 minutes for seasoned riders. However, beginners may take a little longer. The 10″ tubeless pneumatic tires and dual suspension at the front and rear ensure a smooth ride, allowing you to cruise over small bumps.

The pièce de résistance of the InMotion S1 is the large, striking LED display, complete with a mesmerizing blue ring. It’s eye-catching and functional, providing essential information at a glance. Tech lovers love that InMotion S1 is compatible with the InMotion app. It gives you full control of your machine and access to a community of fellow InMotion riders. The deck lights remain a cool blue while riding and automatically flash red during turns, adding a layer of safety and style to your journey.

The 1000W motor propels you to a limited speed of 15.5 mph. But fear not, thrill seekers; you can unlock its top speed of 18.6 mph using the InMotion app. Plus, the motor output is customizable to three power modes. Powering this little beast is a 675Wh battery refillable within 3.5 hours using dual charging. And while InMotion claims it can last 59 miles per charge, expect 43 miles in real-world riding conditions. 

Regarding safety, S1 features BMS protection for the battery, an IP55 rating, and dual braking. The controller and battery boast even higher ratings, with IPX6 and IPX7, respectively.


1. What is considered a long-range electric scooter

A long-range electric scooter is considered to cover at least 25 miles per charge. Extra long-range options can last a minimum of 40 miles.

2. What is the longest range on an electric scooter?

Worry no more if you’re wondering which electric scooter has the longest range. Dualtron Storm Limited takes the cake for the longest-range motorized scooter. It has a manufacturer-quoted mileage of 136 miles, thanks to its 84V, 45Ah Li-ion LG battery. We also love that it supports dual and fast charging.

3. How far can an electric scooter go with a full battery?

It varies depending on the model, battery capacity, and riding conditions. The larger the battery size and the less aggressive the ride, the longer the adventure. 

4. Why a long-range e-scooter might not be for you

A long-range scooter might not be your best choice if you want something lightweight, cheaper than $400, or that charges quickly. However, some models offer dual and fast charging capabilities to minimize the wait.

How to Choose a Bluetooth Home Theater Receiver [+ Our Top 5 Choices Under $120]

Bluetooth audio connection

Are you tired of tangled wires cluttering your living space and craving a sleek, modern upgrade for your old-school stereo system? Welcome to the Bluetooth home theater receiver world, where convenience meets performance. 

A BT adapter breathes new life into your audio setup with just one simple addition. But with countless options and features flooding the market, how do you find the perfect receiver that matches your desires and budget? Fret not, dear audiophile!

This blog will guide you through the essential factors to consider when choosing a Bluetooth audio receiver for home systems. And the cherry on top? We’ve discussed our favorite choices that will amplify your audio game without breaking the bank, all under $120. 

So, sit back, relax, and get ready to dive into the world of exceptional audio experiences without overhauling your stereo system. 

How to Choose a Bluetooth Home Theater Receiver

Factors to consider when choosing a Bluetooth receiver for your home stereo system include:

  • Connectivity
  • Audio quality
  • Range
  • Ease of use

a. Connectivity (ports)

The number of ports and connectivity options in your Bluetooth home theater receiver is essential in creating a truly immersive audio-visual experience. One of the primary reasons is compatibility. With added versatility, you can connect a wide range of audio devices. That way, you configure your home theater setup based on your preferences and the available space. 

Let’s also consider that technology continues to evolve rapidly, and so do home theater systems. Investing in a Bluetooth receiver with multiple ports and connectivity options is a good way to future-proof your home theater system.

b. Audio quality

A home theater system worth its salt should provide an immersive listening experience—something that replicates the sensation of being in a movie theater within the comfort of your own home. In the same vein, a solid Bluetooth receiver ensures your stereo system delivers clear, crisp, and distortion-free sound, adding depth and dimension to the overall experience.

Factors that influence the audio quality of a Bluetooth audio adapter:

  • Bluetooth version: The Bluetooth version determines the overall performance of the receiver, including its range, data transfer speed, and compatibility with devices. Look for a Bluetooth receiver that supports Bluetooth 4.0 or higher.
  • Audio codecs: The BT audio receiver should support a variety of audio codecs to ensure compatibility with different media formats. Some common codecs include SBC, AAC, aptX, aptX HD, and LDAC. The more codecs your receiver supports, the better the audio quality and the broader range of devices it’ll work with.
  • Signal-to-noise ratio (SNR): The SNR measures the difference between the desired audio signal and background noise. A higher SNR indicates clearer and more precise audio output.
  • Frequency response: A broader frequency range ensures a more accurate and natural sound. Aim for a receiver with a frequency response of 20Hz to 20,000Hz, which covers the entire audible spectrum for human hearing.
  • Range: A longer range ensures seamless connectivity without dropouts or interference. Look for a receiver with a range of at least 30 feet or more, allowing you to place your audio devices conveniently.
  • Latency: Low latency is vital for maintaining audio-video synchronization, especially when watching movies or playing video games. Choose a Bluetooth receiver that supports low-latency codecs like aptX Low Latency or FastStream to minimize audio lag and ensure smooth playback.

c. Range

Range determines the distance between the receiver and the connected Bluetooth devices, such as smartphones, tablets, or laptops. 

A greater range allows users to operate and control their home theater system from various locations within the house. That provides flexibility and comfort in managing the audio settings without being physically close to the receiver.

A stable connection between the receiver and the connected devices is essential for maintaining high audio quality. A longer range is, therefore, necessary to sustain seamless audio streaming from a distance and even across multiple rooms.

Several factors influence the range of a Bluetooth home theater receiver:

  1. Bluetooth Version: Newer versions, such as Bluetooth 5.0, offer a significantly longer range than older versions, like Bluetooth 4.2.
  2. Physical Obstacles: Walls, furniture, and other physical objects in the house can impact the range of the receiver. Materials like metal and concrete can obstruct the Bluetooth signal, reducing the effective reach.
  3. Interference from Other Devices: Electronic devices like Wi-Fi routers, cordless phones, and microwaves can interfere with Bluetooth signals, limiting the range. 
  4. Antenna Design: The design and quality of the Bluetooth antenna in the receiver play a significant role in determining the range. A well-designed antenna can enhance the signal strength and extend the range.

d. Ease of use

Usability is critical when choosing the best Bluetooth home audio receiver for your needs. The device should have a straightforward setup process, allowing you to quickly and effortlessly connect their devices to the system. The user manuals should be clear, with step-by-step instructions and illustrations that clarify the receiver’s features and functions.

Some BT audio adapters integrate a large, well-designed, intuitive interface that allows users to navigate menus and settings easily. You’ll, thus, appreciate large, easy-to-read fonts, clear icons, and an organized menu structure.

A Bluetooth home theater receiver that allows users to customize settings, such as audio levels, speaker configurations, and sound profiles, can greatly enhance the user experience. That will enable you to tailor the system to their preferences, resulting in a more enjoyable and personalized experience.

5 Best Bluetooth Home Theater Receivers for 2023

1. 1Mii B06 Plus

1Mii B06 Bluetooth home theater receiver in working mode

Kicking off our roundup of the best Bluetooth receivers for home theaters is the 1Mii B06. It packs a Qualcomm Bluetooth 5.0 chip, ensuring a stable and reliable connection. This advanced technology allows for an impressive range of up to 164 feet in the open air and 70 feet indoors, providing the flexibility to position your audio devices anywhere within your living space.

One standout feature of the 1Mii B06 is its support for aptX HD, a beefed-up version of aptX that provides crystal-clear details and rich, immersive soundscapes. Additionally, the receiver supports aptX low latency, synchronizing the sound perfectly with the on-screen action for an optimal viewing experience free of annoying audio lag.

The 1Mii B06 also automatically reconnects with previously paired devices. This convenience is further enhanced by the receiver’s compatibility with Google Home Mini and Alexa’s Echo, allowing for seamless voice controls.

Another audiophile’s favorite is the 3D surround audio. When activated, the blue LED ring on the top turns green, and the audio transforms into a breathtaking, immersive experience that makes you feel like you’re in the heart of the action.

Setting up the 1Mii B06 is a breeze. Simply connect the receiver to your speakers using an RCA cable or a 3.5mm jack, then pair it with your Bluetooth-enabled audio devices, such as a laptop, tablet, or smartphone. 

2. Esinkin Wireless Audio Receiver

Esinkin Wireless Audio Receiver

Despite its small size (1.96 x 1.96 x 0.9 inches) and weight (a mere 0.4 pounds), the Esinkin Bluetooth receiver packs a powerful punch. A range of 35 feet in open spaces means you can comfortably move around your home without disrupting the music.

Esinkin is compatible with virtually any home stereo system via a standard RCA cable or 3.5 mm jack. Sporting Bluetooth 4 technology, the receiver is incredibly user-friendly and works straight out of the box with a single button press.

Gone are the days of frustrating reconnection times. This best home theater Bluetooth receiver auto connects to the last paired audio device when powered up. And with reconnection time cut to just 15 seconds, you’ll no longer waste time fumbling with settings and devices. 

One user humorously noted that the receiver “literally hijacks the Bluetooth signal to your device,” and “when not connected, it gets jealous and keeps beeping to get your attention and tries to connect.” It’s sincerely determined to provide uninterrupted streaming.

The Esinkin receiver features a bright blue light that flashes while scanning for a device and turns steady once pairing is complete, giving you clear visual feedback on its status. And while it lacks a built-in battery compartment, a USB cable and an AC-DC adapter are included for flexible powering. 

Compatible with major audio streaming apps like Spotify and Apple Music, Esinkin has most of your streaming needs covered. And while it doesn’t support the aptX codec, testers appreciate its relatively clean and clear sound. The quality may, however, suffer slightly at high volumes.

3. Auris BlueMe HD

BlueMe HD’s sleek and modern design is a breath of fresh air in a world of bulky, boxy, and unsightly receivers. The premium anodized aluminum casing, available in black and silver, adds a touch of refinement that seamlessly blends with any home décor.

But don’t be fooled by its elegant appearance – this best Bluetooth home audio receiver packs cutting-edge technology to deliver an unparalleled listening experience. 

First, it provides a glitch-free range of 100 feet,  powered by premium circuitry and a high-gain external antenna. Wave goodbye to glitches and interruptions, and welcome seamless, high-quality audio that will captivate even the most discerning ears, thanks to the cutting-edge Bluetooth 5.0 chip paired with aptX HD, aptX Low Latency, and AAC decoding. An integrated Hi-Fi 384kHz/32-bit DAC (digital-analog converter) cuts noise and distortion, making your music come alive with realism and depth.

Testers rave about BlueMe HD’s audio performance, noting the crystal-clear highs, smooth midranges, and punchy bass. With digital and analog output options, it can connect to any audio system with optical or RCA inputs.

For streaming fanatics, the BlueMe HD seamlessly connects with all your favorite apps, including Spotify, Pandora, Tidal, Amazon Music, and Apple Music. Just plug it in, and you’re ready to enjoy endless hours of entertainment.

Finally, this best Bluetooth home stereo receiver comes with self-adhesive bumpers for secure placement and a quick start guide to ensure a hassle-free setup.

4. 1Mii B03 Pro Bluetooth Home Theater Receiver

1Mii B03 Pro Bluetooth home theater receiver

What sets the 1Mii B03 Pro apart from most competitors is its switchability between a transmitter and a receiver. As a transmitter, it Bluetooth-enables your home audio source, allowing you to stream music to your BT headphones or speakers. As a receiver, it streams audio wirelessly from your BT-enabled device to your stereo system.

The 1Mii B03 Pro’s dual-link feature is another standout feature. It enables you to stream music to two sets of speakers simultaneously. However, keep in mind that it doesn’t provide the option to choose between connecting with one or two devices.

Equipped with the latest Bluetooth 5.0 technology, this Bluetooth receiver for home theater offers added support for Qualcomm aptX HD and Low Latency. This high-end Bluetooth tech is paired with two antennas, providing a maximum range of 265 ft in the open air and 80 ft indoors. Of course, your ideal range will depend on physical obstructions, other wireless connections, and the receiving device.

This powerful device supports analog and digital inputs and outputs, allowing for flexible connections. The built-in DAC (Digital-to-Analog Converter) is recognized as the gold standard for sound performance among audiophiles, delivering superior resolution and detail for an immersive listening experience. If you prefer, you also have the option to use an external DAC.

The 1Mii B03 Pro doesn’t skimp on user-friendly features, either. You’ll appreciate the power button, which puts control over the device at your fingertips. That’s unlike auto-connect options without ON/OFF functionality. On-board volume control adds to its convenience. Included, too, is a wide-screen display that provides basic details about the connection. For a more sophisticated screen that allows you to select your preferred BT device, 1Mii B03+ will suffice.

5. Pyle Bluetooth Home Audio Amplifier

Pyle PFA330BT Bluetooth audio amp

Pyle PFA330BT’s compact size makes for optimal flexibility. So, it’s an excellent choice for those who want to enjoy their favorite tunes in various environments without compromising audio quality. With Bluetooth version 5.0 tech, you can expect a manufacturer-quoted range of up to 40 feet

We love the integrated mini amplifier circuitry in this Bluetooth home audio receiver. The front rotary controls for volume, treble, and bass adjustments allow you to tailor the audio output to your preferences. You’ll also appreciate how the blue ring around the volume knob adds a touch of style to the device. It also provides a clear visual cue that the amplifier is powered on and ready to use. 

Dual-channel capability is a welcome addition to this BT amplifier. Each channel receives 45 watts of power, allowing you to pair the receiver with two speaker sets simultaneously. It also allows for input selection between Bluetooth and Aux/MP3. And besides the typical RCA cable and 3.5mm jack, it includes a microphone port

Another noteworthy feature of this Bluetooth audio amplifier is its ability to work with an external battery. That adds convenience and flexibility, as you can use it in locations where a power source might not be readily available (Think outdoor events or camping trips).

Inventory Cycle Count in eCommerce: Benefits and Best Practices

Home » Blog » eCommerce
inventory cycle count

Inventory management is the heart of every successful online business in today’s fast-paced eCommerce landscape. With the relentless growth of online shopping, ensuring that your inventory is well-managed, accurate, and up-to-date is more crucial than ever. That’s where inventory cycle count for eCommerce comes into play.

In this must-read blog, we dive deep into the exciting world of cycle counting in eCommerce, exploring its benefits and insider success tips that will empower you to revolutionize your inventory management strategy. 

Let’s start by answering the question, “What does cycle count mean in inventory management?”

What is Inventory Cycle Count? 

Cycle counting is a method of inventory management that involves continuously counting a small portion of the inventory rather than conducting a full-scale inventory count at specific intervals. This method allows businesses to maintain an accurate inventory record throughout the year, with counts typically scheduled based on the importance and value of the items.

Inventory Cycle Count Vs. Physical Inventory Count

Annual physical inventory counts can be time-consuming, labor-intensive, and disruptive to business operations. Moreover, they only provide a snapshot of inventory at one point in time, leaving room for errors to accumulate throughout the year. 

On the other hand, cycle counts offer continuous monitoring and adjustment of inventory levels, leading to improved accuracy and efficiency.

Learn more about cycle count vs. physical count differences.

Benefits of Inventory Cycle Counting Vs. Other Inventory Management Methods

Advantages of cycle count for eCommerce include:

  • Improved accuracy
  • Reduced disruption
  • Better resource allocation
  • Real-time data
  • Cost savings
  • Scalability

1. Improved accuracy

By regularly counting a small sample of inventory, you can quickly identify discrepancies and address them before they become significant issues. That increases inventory record accuracy, leading to better decision-making and forecasting.

2. Reduced disruption

Traditional inventory counting methods, such as annual physical counts, often require shutting down operations to complete the count. Contrarily, you can cycle count inventory during regular business hours with minimal disruption, allowing companies to maintain their operations while keeping their inventory data up-to-date.

3. Better resource allocation

Cycle counting allows businesses to spread the workload of inventory management across the entire year rather than concentrating it in a single, labor-intensive period. Your business benefits from more efficient use of resources, as employees can focus on other tasks when not engaged in cycle counting.

4. Real-time data

When businesses cycle count inventory, they can access real-time inventory data, which can be invaluable for decision-making and forecasting. That way, you can respond more quickly to changes in demand, adjust your purchasing strategies, and better manage your stock levels.

5. Cost savings

By promptly identifying and addressing discrepancies in inventory records, eCommerce businesses can minimize the risk of stockouts, overstocking, and other inventory-related issues, leading to cost savings over time. Moreover, cycle counting can reduce the need for large-scale physical inventory counts, which can be expensive and time-consuming.

6. Scalability

Cycle counting can be easily scaled up or down, depending on the size and complexity of the business. This flexibility makes it an attractive option for businesses of all stripes and sizes.

Inventory Cycle Count Best Practices

Implementing an effective cycle counting program into your eCommerce venture can increases efficiency, cost savings, and customer satisfaction. Here are some pointers to consider:

1. Define your objectives

Determine the goals of your cycle counting program, such as improving inventory accuracy, reducing stock discrepancies, or minimizing stockouts. Having clear objectives will help guide your implementation process and measure the success of your program.

2. Categorize inventory items

Classify your inventory items based on their value, usage frequency, or other relevant criteria. That will help you prioritize which items should be counted more frequently and allocate resources accordingly. For example, you may adopt the ABC classification system, where A items are high-value or high-turnover items, B items are moderate value, and C items are low-value.

3. Develop a cycle counting schedule

Create a schedule for counting different inventory items, considering their classification, the size of your warehouse, and the available resources. You may opt for a daily, weekly, or monthly cycle count, depending on the nature of your business and the inventory items.

4. Assign responsibilities

Clearly define the roles and responsibilities of the team members involved in the cycle counting process. This may include warehouse staff, inventory managers, and data analysts. Ensure that everyone is trained and understands their role in the process.

5. Establish a standard operating procedure (SOP)

Develop a detailed SOP for conducting cycle counts, including the steps to be followed, the tools used, and the documentation required. This will help ensure consistency and accuracy in the cycle counting process.

6. Use technology

Utilize inventory management software or other technologies to streamline the cycle counting process, reduce manual errors, and improve the accuracy of your inventory records. Barcode scanners, mobile devices, and real-time inventory tracking systems can be helpful in this regard.

7. Monitor and analyze results

Regularly review the results of your cycle counting program to identify trends, discrepancies, and areas for improvement. Use data analytics to uncover patterns and make data-driven decisions to optimize inventory management processes.

Potential Challenges and Solutions in Cycle Inventory Count

Resistance to change

Implementing a new cycle counting program may face resistance from employees accustomed to traditional inventory management methods. To overcome this, involve your team in the planning process, provide adequate training, and communicate the new system’s benefits.

Insufficient resources

If your business has limited resources, allocating the necessary time and personnel to conduct cycle counts may be challenging. To address this issue, prioritize high-value items or outsource the cycle counting process to a third-party provider.

How Inventory Management Software Helps Businesses Manage Cycle Counts

Inventory management software is a critical tool for businesses that must maintain an accurate and up-to-date record of their stock levels. This section will explore how it streamlines and optimizes the cycle counting process.

a. Automation

 Inventory management software automates the cycle counting process, reducing the need for manual input and minimizing the chance of human error. 

With automation, businesses can set up a specific schedule for cycle counting, and the software will automatically prompt staff to conduct the counts. That ensures the counts are performed consistently and regularly, leading to more accurate inventory data.

b. Real-time data synchronization

Modern inventory management software often integrates with other business systems, such as point-of-sale (POS) and enterprise resource planning (ERP) software. This integration allows real-time data synchronization between systems, ensuring that inventory information is always up-to-date.

c. Customizable counting methods

Inventory management software allows businesses to choose from various counting methods, such as random sampling, ABC analysis, or the 80/20 rule. This level of customization enables businesses to tailor their cycle counting process to their specific needs, preferences, and industry requirements, ensuring the most effective and efficient approach is taken.

d. Reporting and analytics

The software typically includes reporting and analytics features that help businesses track the effectiveness of their cycle-counting efforts. These reports can reveal trends in inventory accuracy, identify common sources of discrepancies, and highlight areas for improvement.

The data-driven approach allows businesses to continuously refine their cycle counting processes and maintain high levels of inventory accuracy. Furthermore, many inventory management apps offer versions that are specifically designed for smartphones.

Bottom Line

Cycle counting for eCommerce offers numerous advantages over other inventory management methods, such as improved accuracy, reduced disruption, better resource allocation, real-time data, enhanced accountability, cost savings, and scalability. Adopting this approach allows you to streamline inventory management processes and make more informed decisions based on accurate, up-to-date data.

5 Best Mid-Range Smartphones in Kenya for 2022

Home » Blog » eCommerce

Best mid-range smartphones in Kenya

You’re hunting for the best mid-range smartphones in Kenya and want something suitable for your needs without paying through the nose. But what’s worse than paying for a lame phone is getting ripped off. And that’s where this compilation comes in.

We’ve taken the time to analyze the Kenyan market and compile the five best contenders for mid-range smartphones worth your money. These options have everything from incredible cameras to FHD screens to long battery life, so no matter what you’re looking for, there’s something on this list that will catch your eye. After all, a capable yet affordable piece of technology is the kind of luxury a techie can’t resist.

So, grab a cup of coffee and enjoy the show—you’re in for a treat!

5 Best Mid-Range Smartphones in Kenya in 2022

1. Xiaomi Redmi Note 10s

best mid-range smartphones in Kenya

Price: Ksh 25,699

Xiaomi Redmi 10s is a conversation starter that your friends will idolize. It has a lot going for it, delivering an impressive display experience paired with an excellent design that reminds us of its sibling, the Poco X3 GT. Its color options are broader, ranging from Onyx gray, Oceanic blue, Pebble white, and Starlight purple. A responsive edge-mounted fingerprint scanner backed up by face unlock allows quick and secure access to your phone.

The AMOLED is a welcome addition for buyers looking for something brighter or crystal clear than most LCD panels. Plus, it’s a 6.43-inch dot display, meaning you’re getting an edge-to-edge screen without any annoying water-drop notch. Full HD+ resolution of 2400 x 1080 pixels offers a pixel density of 409 PPI, so you benefit from better viewing angles and crisper images. 

The lack of a pre-installed screen protector is disappointing, but we appreciate that Xiaomi included Corning Gorilla glass which should keep your screen safe from everyday wear and tear.

The Redmi 10S device runs on Android 11 with Xiaomi’s MIUI 12 launcher out of the box. And while you don’t expect an ultimate powerhouse at this price point, the MediaTek Helio G95 chipset backed by 6 GB or 8 GB RAM makes it a joy to use. The 64GB or 128 GB internal memory will let you store all your photos, videos, and apps with little to worry about running out of space.

Another notable feature is the inclusion of a quad-lens camera setup on the rear panel of this best smartphone in Kenya. You can expect the 64MP primary sensor to perform well in most lighting conditions. And you can also take advantage of AI image processing for better results in difficult lighting conditions or when shooting fast-moving objects. Plus, it can record 1080P videos at 60fps with the option to add a slow-motion effect. There’s also a 13MP front camera that tops out at 1080p@30fps videos. 

Xiaomi packed plenty of features and toggles into the comprehensive control center on this device. Plus, you can customize your experience with various themes available in the Mi Theme Store.

The stereo speakers churn out superb audio quality, and the 5000mAh battery (paired with 33W fast charging) should keep you going all day long.

Tagline: Best pixel density


  • Striking design
  • AMOLED higher-resolution display
  • Capable of capturing 1080P videos at 60 fps
  • A generous RAM and ROM size
  • Clearer, AI-enabled camera setup
  • Stereo speakers
  • Multiple color options
  • Water resistant up to level 3


  • Not as affordable
  • It could be better with a Snapdragon chipset
  • Smaller screen size


  • Dimensions: 16.1 x 7.5 x 0.8 cm
  • Display: 6.43-inch, 1080 x 2400 pixels, 409 PPI, Corning Gorilla Glass 3, AMOLED
  • OS: Android 11, MIUI 12.5
  • Processor: MediaTek Helio G95, octa-core, Mali-G76 GPU
  • Camera: 64MP main, 13 MP selfie, 1080p@30/60fps
  • Storage: 6/8GB RAM, 64/128 GB ROM
  • Battery: 5,000mAh, non-removable, Li-Po, 33W fast charging
  • Water resistance: IP53
  • Extras: Side-mounted fingerprint sensor, stereo speakers, 3.5mm audio jack, Bluetooth 5.1, USB type-C, NFC

2. Tecno POVA Neo

Price: Ksh 16,298

POVA Neo is a more budget-friendly version of the POVA 2, but it still packs all the bells and whistles to keep up with your everyday needs. It’s sleek and stylish, but don’t let its looks fool you: it packs some serious hardware to keep your game on point.

In terms of design, it’s pretty much like most 2021-22 smartphones out there—a rectangular block with rounded corners. You’ll find the power button and volume keys on the right side of the device, while the SIM card tray is nestled on the left. The bottom houses a USB Type-C port, microphone hole, speaker grille, and 3.5mm audio jack. It sports a rear-mounted fingerprint scanner. Plus, it’s available in three colors: Powehi black, Obsidian, or Geek blue—each is a sleek and sophisticated standout that adds flair to your style. 

Based on Android 11 with HIOS 7.6, the POVA Neo is ready to deliver an unmatched experience right out of the box. And with an Octa-core 2.0 GHz processor and an ET Engine powering its high-refresh-rate graphics and dynamic control adjustments, you can expect it to handle demanding games like Call of Duty and PUBG seamlessly. 

With this best mid-range smartphone in Kenya, you get a 6,000mAh Li-Po battery replenishable in two hrs with the stock 18W fast charger. That’s good music to the ears of impatient, heavy users. 

A 4GB RAM + 64GB ROM combo means you’ll never have to worry about slow responses or running out of space for files or apps. And if that’s not enough for your needs, this best smartphone in Kenya supports memory cards up to 256 GB in size. Plus, the integrated phone cloner will let you move data from an old phone onto a new one hassle-free.

POVA Neo has a 6.8-inch dot-notch display with 720 x 1640 resolution, 263-pixel density, and 83% screen-to-body ratio. That’s pretty enough to give you an immersive experience, but it might be dimmer in direct sunlight. The notch houses an 8MP single-lens, dual-flash camera backed by a 13MP dual-lens, quad-flash rear camera.

And did we mention this best mid-budget smartphone in Kenya has an integrated voice changer? Yes, that’s right. And whether you want to sound more like an alien or a chipmunk, we won’t judge.

Tagline: Best battery, largest display


  • Best-in-class battery capacity
  • Seamless data migration between two phones
  • Impressive storage for the price
  • Multiple color options
  • Larger, 120Hz dot screen
  • Supports fast charging
  • Integrated voice changer


  • Its screen resolution could be better
  • Not ideal for professional photos


  • Dimensions: 17.1 x 7.7 x 0.9 cm
  • Display: 6.8-inch, 720 x 1640p, 263 PPI, 480 nits, 120Hz, IPS LCD
  • OS: Android 11, HIOS 7.6
  • Processor: MediaTek Helio G25, octa-core, PowerVR GPU, ET Engine
  • Camera: 13MP quad-flash main, 8MP dual-flash selfie, 1080p@30fps
  • Storage: 4GB RAM + 64GB ROM
  • Battery: 6000mAh, non-removable, Li-Po, 18W fast charging
  • Extras: Rear fingerprint scanner, Bluetooth 5.0, 3.5mm audio jack, USB type-C, OTG, 

3. Xiaomi Redmi 10C

Price: Ksh 19,599

If you’re looking for something that’s incredible value for money, the Xiaomi Redmi 10C is right up your alley. 

Available in Ocean blue, Mint green, and Graphite gray, this best smartphone in Kenya has everything you need to stay connected and entertained. Its rear-mounted fingerprint scanner is rear-mount can be hard to reach, and that’s where face unlock comes in handy. The textured back casing feels fantastic in hand and makes it easier to grip the phone. 

Redmi 9C’s successor features a 6.7” IPS LCD with a water-drop notch and a resolution of 720 x 1650 pixels which isn’t as bright outdoors as flagships but still decent enough to get your work done indoors without straining your eyes. 

A 60Hz screen refresh rate is standard at this price point but ensures the phone handles typical tasks just fine. A 5000mAh battery will last through hours of binge-watching, and the powerful speaker brings life to every sound. All these work together to bring you an immersive entertainment experience without breaking the bank.

Read Mode safeguards your eyes against harmful, sleep-depriving rays while reading or watching videos at night. And then there’s that 3rd Gen Corning Gorilla Glass that keeps the screen clear of scratches and scuffs. 

The camera module isn’t as striking. But looks can be deceiving as it houses a 50MP rear camera with Night Mode, HDR, Panorama technology, and 1080P video recording capability. The selfie camera is subpar at 5MP, but you could improve the results with GCam.

Redmi 10C runs on Android 11 and MIUI 13 platforms powered by a Snapdragon 680 processor, offering similar performance as Redmi Note 11 but at a lesser price. The RAM is 4GB, which means faster typing speed and loading times across demanding apps like inventory management apps. An integrated extension feature can boost its size up to 5GB if needed. You get two options for internal storage: 64 GB or 128 GB. 

Tagline: Best processor


  • Better processing power
  • Higher-detail rear camera
  • Impressive RAM + ROM combo
  • Corning Gorilla glass protection for the screen 
  • Expandable RAM
  • Read Mode helps reduce eye strain
  • Multiple options for the body color


  • No pre-installed screen protector and protective casing
  • The selfie camera could be better
  • No IR blaster as seen in other siblings
  • It doesn’t support split-screen multitasking or app sidebar
  • Hard-to-reach fingerprint scanner


  • Dimensions: 16.9 x 7.7 x 0.8 cm
  • Display: 6.7-inch, 720 x 1650 pixels, 268 PPI, Corning Gorilla glass protection, IPS LCD
  • OS: Android 11, MIUI 13
  • Processor: Snapdragon 680, octa-core, Adreno 610 GPU
  • Storage: 4GB RAM( expandable to 5GB), 64GB ROM
  • Camera: 50MP main, 5MP front, 1080p@30fps
  • Battery: 5000 mAh, Li-Po, non-removable, 18W fast charging
  • Extras: 3.5mm audio jack, Bluetooth 5.0, NFC, rear-mounted fingerprints, USB type-C

4. Samsung Galaxy A03s

Price: Ksh 14,249

Galaxy A03s is an excellent choice if you’re gasping for an affordable yet solid Samsung phone. It comes in black, white, red, or blue, so choose whatever works best for your style.

Its design is decent, with an all-black tapered plastic casing. At the front sits a 6.5-inch, 1600 x 720 IPS LCD panel surrounded by quite a chunky black border and packs around 270 pixels per inch (PPI). That definitely won’t blow you away with its clarity, but it’s a decent viewing experience overall. The water-drop notch and higher screen “chin” leave you with ample screen real estate.

A03s is among the few best smartphones in Kenya under 15k with a power button that also serves as the fingerprint scanner. It’s fast, accurate, and a welcome leap from the rear-mounted scanners synonymous with many rivals in this price range.

Samsung crammed a 3GB Ram and Mediatek Helio P35 processor into this little guy. It’s fast enough to handle anything you throw at it while still being efficient enough to keep battery life high. Plus, you get 32 gigabytes of internal storage—about 19 GB of which is usable, which is still sufficient to keep all your favorite files close by. There’s also a 4GB model with 64GB RAM if you want more space! 

This best mid-range smartphone in Kenya packs a triple-lens rear camera setup comprising a 13MP primary camera, a 2MP depth camera, and a 2MP macro camera. And if you want to take more than just photos, the A03s’ 5000mAh battery gives you plenty of juice to keep going all day. Plus, it supports 18W fast charging. Unfortunately, it comes with a 5W charger that takes 4 hrs to refill the battery. 

Tagline: Most affordable


  • Side-mounted fingerprint sensor
  • Respectable storage for the price
  • It offers most color options in its category
  • Supports fast charging
  • Impressive battery capacity
  • Expansion slot for up to 1 TB
  • Supports Bluetooth 5.0 and USB type-c for faster data transfers


  • The speaker system could be better
  • The screen could be sharper
  • The package doesn’t include a fast charger


  • Dimensions: 16.4 x 7.6 x 0.9 cm
  • Display: 6.5-inch, 720 x 1600 pixels, 270 PPI
  • OS: Android 11 (Upgradable to Android 12)
  • Processor: Mediatek Helio P35, octa-core
  • Storage: 3/4 GB RAM, 32/64 GB ROM
  • Camera: 13MP main, 5MP front, 1080p@30fps
  • Battery: 5000 mAh, non-removable, 15W fast charging
  • Charging duration: 4 hrs (with the 5W stock charger)
  • Extras: USB type-C, NFC, Bluetooth 5.0, side-mounted fingerprint sensor, 3.5mm audio jack, dual sim, 4G 

5. Tecno CAMON 19 Pro

Price: Ksh 35,399

The new kid on the block, Tecno Camon 19 Pro, is a big chunk of awesomeness, standing out with a flat body design and tempered glass, silk matte finish back. But don’t mistake the slimmer profile for a lack of power. Running on Android 11, Mediatek Helio G96 chipset, and HIOS 8.6, this best smartphone in Kenya is as fast and reliable as you’d expect from a premium product.

It comes with a 6.8-inch AMOLED dot display with a 120Hz refresh rate, making scrolling and swiping through websites or apps noticeably smoother. And with 1080 x 2460p resolution, you can better stream 4K content from Amazon Prime, Netflix, or YouTube (just ensure your internet connection is fast enough).

Something else stands out: the versatile camera setup. It includes a 64MP primary camera rated for 60X zoom, which works well for distant objects. And while the detail isn’t as impressive, that shouldn’t compromise your experience.

OIS+EIS stabilization on the 50MP portrait lens makes for more refined videos. Sure, you don’t expect to get away without some shaky movements here and there, but that’s preferable to software-based stabilization techniques that may introduce artifacts into your recordings. Completing the arrangement is a 32MP punch-hole front camera that captures skin tone with plenty of contrast. Video recording tops out at 1080p on both rear and front cameras.

Audio-wise, you get FM radio, the old-school 3.5 mm headphone jack, and a loud mono speaker with no bass. BT 5.0 ensures distortion-free connections with Bluetooth home theater receivers and other BT-enabled devices.

The battery life is respectable: 5,000 milliamperes hours gives you 6-7 hours of gameplay between charges. And when it gets drained? No worries—the provided 33W fast charger should refill it within 65 minutes. Last and undoubtedly not least, you get a staggering 256 Gigabytes of internal storage. 

Tagline: Best internal storage, highest refresh rate


  • Class-leading internal storage
  • Snazzy design
  • Larger, AMOLED, higher-resolution display
  • It supports 33W fast charging
  • Highly capable rear and front camera
  • Gimbal stabilization ensures more polished videos
  • Best-in-class screen refresh rate


  • Slacks on audio quality
  • Colors aren’t that accurate as they tend toward bluish
  • The processing power could be better
  • It may take a while to get a hang on of the new notification bar and control center


  • Dimensions: 16.7 x 7.5 x 0.85 cm
  • Display: 6.8-inch, AMOLED, 1080 x 2460p, 395 PPI
  • OS: Android 11, HIOS 8.6
  • Processor: Mediatek Helio G96, octa-core
  • Storage: 8GB RAM, 128/256GB ROM
  • Camera: 64MP main, 32MP front
  • Battery: 5,000 mAh, non-detachable, Li-Po, 33W fast charging
  • Charging duration: 65 mins
  • Extras: Side-mounted fingerprint scanner, NFC, GPS, USB type-C 2.0